Home Products Solutions Media Center Service & Support Contact Us About
Home > Products > Complementary Products > Dripper Flow Tester
1
2
3
4
Dripper Flow Tester

Sysmetric Dripper Flow Tester


The Sysmetric Dripper Flow Tester can test any type of emitting device from drip tubing and drip tape to button drippers and sprinklers. Using load cells to measure the collected water allows a very high accuracy of flow measurement in the shorter possible time because up to 10 samples can be tested simultaneously at the same pressure.
The testing machine is ISO 9260 and ISO 9261 compliant. Standard testing diameters from 12-25 and others available upon request. Tests are fully programmable with up to 30 different test pressures times. Each test produces a report which includes graphs and statistical analysis such as exponent and CV.

Benefits
  • Conforms with international standards ISO-9260 and ISO-9261 for drippers
  • Can be used with any tube, 12-25mm diameter
  • Measures dripper flow rate at any pressure
  • Conducts one test at a time, with up to 10 drippers per sample
  • Every test can include up to 30 measurements, each with its own pressure and preconditioning time
  • Each measurement recorded for later processing/analysis
  • Produces reports and graphs of test results
Features
  • Controlled by Standard Omron PLC
  • Method of testing – by weighing. Wait 15 second for results
  • A library of pre-defined tests for easy operation
  • Semi-automatic calibration
  • All parts that come into contact with water are made out of stainless steel
  • Optional temperature control
Specifications
  • Tube diameter: 12-25mm
  • Supported capacities: 0-30, 30-120liter/hour
  • Pressure range: 0-80meters (0-800Kpa)
  • Measurement accuracy: 1% for single measurement
  • Pressure accuracy: 0.1 meter (1Kpa)
  • Power supply: 1 phase 220VAC 50/60Hz
  • Air supply: 6.5 bars
  • Physical dimensions: 5 stations - 1620X600X1020
  • Physical dimensions:10 stations - 1700X860X1020