Галерея
ГалереяНовости

New Showroom @ Sysmetric USA

Sysmetric USA is proud to announce the opening of the new showrooms at Sysmetric USA headquarters in Mooresville NC. Sysmetric plastic raw material handling and gravimetric CD blending systems are on display for both demonstration and training purposes.

January 2020

Visit the Sysmetric USA showroom for demonstrations of Sysmetric unique plastic raw material handling and blending systems.

Call us on  (833) 215-6967 (Toll Free) and arrange a visit.

 

 

 

 

 

 

 

Новинки от компании Sysmetric:

Цифровая система внутреннего охлаждения рукава (D-IBC) для станков изготовления пленки раздувом с экструзией.

10 октября 2011 г.

Digital Internal Bubble Cooling (D-IBC) for Blown Film Extrusion
The latest digital internal bubble cooling system developed by Sysmetric, has already seen over a year of successful activity. This system is part of the Sysmetric comprehensive line and profile control models.
The unique Sysmetric system employs 8 ultrasonic sensors (as opposed to 5 sensors to be found in most systems on the market), a Sysmetric designed dedicated “sensor-controller” circuit board, a new digital  balancing valve developed by Sysmetric operated by a servo step motor and a unique control method called modeling.
All of the above features ensure both highly accurate width control and fast reaction times.
So Why Invest in this Type of Control System?
First and foremost, in order to reduce setup time and waste material created during product size changes without dependency on skilled operators thus saving money.
The high stability provided by the system allows changing production parameters such as increasing output whilst maintaining high production accuracy.
The meticulous checking of all of the system components that is carried out by the system during operation and the automatic back up of some of the components promises early detection of any faults before any damage can be caused and a reduction in valuable maintenance time.

Gili Gozani

Chief Engineer
Sysmetric

Компания Range Plastics пожинает плоды преимуществ системы управления производственными линиями

Начальник отдела технологических разработок Дэйв Хендли и начальник производственного отдела Эдди Безуйденхаут, с многолетним опытом работы в сфере экструзии пленки с раздувом в Западно-Капской провинции США, работающие в компании Range Plastics, очень довольны качеством изготовляемой полипропиленовой плёнки. Производственная линия, осуществляющая коэкструзию, предусматривает возможность изготовления трехслойного продукта из раны материалов и различной толщины. Система транспортировки материалов, включая дозирующие и смешивающие установки, а также систему управления производственными линиями были поставлены израильской компанией Sysmetric…

18 мая 2011 г.

Range Plastics’ MD Dave Handley and production manager Eddie Bezuidenhout, veteran of the blown film business in the Western Cape, report that they are happy with the quality of PP film being produced. The coex line is able to produce three layers of different materials and thicknesses. The materials handling system, including the dosing and blending units as well as the control system, was supplied by Sysmetric of Israel.

Click here to see the article

Plastics Today Report

Plastics Today rсообщает, что системы обработки SYSMETRIC материалы предназначены для точного исполнения и минимального обслуживания

5 сентябрь 2014 г.

Plastics Today reports: Resin dosing, blending, and material handling systems engineered for accurate performance and minimal maintenance by Sysmetric (Israel) are available in the United States and Canada through CMD Corp. (Appleton, WI).

Click here to see the article

Sysmetric Case Study by Siemens

Reducing the need to construct expensive physical prototypes is one of the major benefits of using Solid Edge® software from product lifecycle management (PLM) provider Siemens PLM Software. Material handling systems maker Sysmetric, Ltd. has taken this benefit to its logical conclusion, completely eliminating physical prototypes altogether.

5 сентябрь 2014 г.

Reducing the need to construct expensive physical prototypes is one of the major benefits of using Solid Edge® software from product lifecycle management (PLM) provider Siemens PLM Software. Material handling systems maker Sysmetric, Ltd. has taken this benefit to its logical conclusion, completely eliminating physical prototypes altogether.

Click here to see the article